Transend
Transcend AirMist Starter Pack
Couldn't load pickup availability
Materials
Materials
Transend Transcend AirMist Starter Pack Description:
Transcend AirMist HME Adapter
The Transcend HME adapter is a two-piece plastic housing unit designed for the AirMist HME cartridge, essential for adding waterless humidification to your Transcend Micro. The bottom portion of the adapter connects to your CPAP hose, while the top portion attaches to your mask. To use, simply insert an HME cartridge into the bottom part of the adapter, then attach and secure the top part. Finally, connect your hose and mask at either end and enjoy humidified air with your CPAP therapy without the need for a bulky water chamber.
AirMist HME Adapters should be cleaned weekly with soap and water and replaced every three months.
Transcend AirMist HME Cartridge
The AirMist HME Cartridge is a specialized foam component encased in a plastic shroud. It inserts into the AirMist HME Adapter to capture moisture from your breath and redistribute it into your therapy air. AirMist HME Cartridges should be replaced after 3 to 7 days of use and are not designed to be cleaned.
What's included in the Transcend AirMist Starter Pack:
- 1x AirMist HME Adapter
- 2x AirmIST HME Cartridges
Compatibility Note:
- The Transcend HME Adapter is only compatible with the Micro Standard 6 ft Hose or Micro AirFlex 6 ft Hose.
- Transcend AirMist HMEs will not function with masks that have extended short tubing or top-of-head hose connections, such as:
- AirFit P10
- AirFit N20
- ResMed Swift FX
- AirFit F30i
- DreamWear Masks - The HME Adapter must be placed directly in front of your mask to effectively capture moisture from your breath.
Instructions for Installing the AirMist HME Adapter and AirMist HME Cartridge:
- Remove the HME cartridge from the foil package. Handle it with the plastic shroud, not the foam core.
- Unscrew the bottom part of the HME adapter from the top part.
- Place the HME cartridge inside the bottom part of the HME adapter.
- Reattach the top part of the HME adapter to the bottom part and gently turn until the adapter compresses around the HME cartridge.
- Securely attach the bottom part of the HME adapter to your hose.
- Securely attach the top part of the HME adapter to your mask.
Maintenance:
- The AirMist HME Cartridge is not cleanable and should be replaced after three to seven days of use.
- Clean the AirMist HME Adapter weekly or whenever you replace the AirMist HME Cartridge.
![Transcend AirMist Starter Pack](http://thesleepspot.co.nz/cdn/shop/files/AirMist-Starter-Pack.png?v=1717644219&width=1445)